PUF Pipe Section

Rigid polyurethane pipe insulation

Polyurethane foam is a polymer formed when isocyanate and polyol react. The compounds are mixed and poured into a mould to form a rigid, cellular foam. The result is a lightweight polymer with excellent insulating properties.

36 - 40 kg/m³Density range
½" to 24"Pipe diameter
0.021 W/m·KThermal conductivity

Request a quote WhatsApp for price

Ex-stock at Vatva GIDC (Ahmedabad) and Jetpar Road (Morbi). The datasheet and test certificates come with every dispatch.

Where PUF Pipe Section is used

7 common applications. Not sure it suits your duty? Send us the operating temperature and we will tell you.

Ask about your application

01Cold storage and refrigerated warehousing
02Critical industrial applications where keeping a consistent temperature is the priority
03Pipe insulation
04Cold storage, cold rooms
05Food processing units
06Shopping malls
07Auditoriums

Technical characteristics

Values as given in the product datasheet.

Property	Value
Density	36 to 40 kg/m³
Closed cell content	90% (min.)
Pipe diameter	½" to 24"
Thickness	Pipes: 25 - 100 mm
Dimensions	Pipe: 1 m L
Temperature range	-180°C to 110°C
Thermal conductivity	0.021 W/m·K at 10°C
Compressive strength	205 kN/m²
Water absorption	0.5% by volume
Water vapour permeability	5.5 max (ng/Pa·s·m)

Thermal resistance (R value)

Thickness (mm)	R value (m²·K/W)
25	1.08
30	1.3
35	1.52
40	1.73
45	1.95
50	2.17
75	3.26
100	4.34

PUF Pipe Section datasheetPDF, 231 KB, sent to your inbox. Full technical values, sizes and applications.

Why specify PUF Pipe Section

11 reasons it earns its place on site.

Environment friendly CFC and HCFC free polyurethane foam of desired and uniform density
Closed cell content over 90%
Excellent dimensional and thermal properties
Superior insulating efficiency leading to energy savings
Durable
Water and moisture resistant
Resists most oils, chemicals and solvents
Fire resistance
Void free insulation
No thermal bridges
Cost effective

Services that use this product

We supply PUF Pipe Section on its own, or fit it as part of these services with our own crews.

All services

Cold insulation
Chilled water, brine and refrigeration lines with a continuous, sealed vapour barrier.
Read more
Thermal insulation
Heat loss and heat gain controlled on tanks, equipment and buildings, specified by operating temperature.
Read more

Questions, answered.

The ones we get most about PUF Pipe Section. Anything else? Ask on WhatsApp and an estimator will reply.

What temperature can PUF Pipe Section take?

Temperature range: -180°C to 110°C, as per the datasheet. Tell us your operating temperature and we will confirm the right grade before we quote.

What sizes and grades does PUF Pipe Section come in?

Thickness: Pipes: 25 - 100 mm; Dimensions: Pipe: 1 m L; Pipe diameter: ½" to 24"; Density: 36 to 40 kg/m³. If you need a size that is not listed, ask us and we will check what the manufacturer can make.

Where is PUF Pipe Section used?

Typical uses: cold storage and refrigerated warehousing; critical industrial applications where keeping a consistent temperature is the priority; pipe insulation; cold storage, cold rooms.

Can SGPL supply and install PUF Pipe Section?

Yes. We supply it on its own, or our own crews install it as part of our cold insulation and thermal insulation work. That starts with a site visit and a written specification, and ends with a joint measurement at handover.

Is PUF Pipe Section in stock, and do you send a datasheet?

We hold PUF Pipe Section at our Vatva GIDC (Ahmedabad) and Morbi stockyards. You can download the datasheet on this page, and we can send the test certificate with the dispatch. Send your enquiry before 4 pm and you will usually hear back the same working day.