Hot insulation
Steam lines, boilers, vessels and ducting held at temperature and finished in metal cladding.
Read more
Ceramic fibre
Ceramic Bulk Fibre
Loose fibre insulation
Bulk ceramic fibre is made from alumina, silica and zirconia. It resists most chemicals except hydrofluoric and phosphoric acids and strong alkalies.
- 1200 - 1425°CClassification temp.
- Loose fibreProduct form
- WhiteAppearance
Ex-stock at Vatva GIDC (Ahmedabad) and Jetpar Road (Morbi). The datasheet and test certificates come with every dispatch.
Where Ceramic Bulk Fibre is used
5 common applications. Not sure it suits your duty? Send us the operating temperature and we will tell you.
- 01Raw material for finished products such as boards, shapes, paper and yarn
- 02Expansion joints, patching and emergency repair in furnaces, boilers, heaters
- 03Loose insulation fill for crowns and walls of kilns and furnaces
- 04Packing material for temporary insulation
- 05Precursor for engineered fibres
Technical characteristics
Values as given in the product datasheet.
| Property | Value |
|---|---|
| Product form | Loose fibre |
| Appearance | White |
| Classification temperature | 1200 / 1260 / 1425°C |
| Specific gravity | 2.65 |
| Fibre diameter | 3.0 - 4.0 microns |
Ceramic Bulk Fibre datasheetPDF, 231 KB, sent to your inbox. Full technical values, sizes and applications.
Properties by grade
| Property | 1200°C | 1260°C | 1425°C |
|---|---|---|---|
| Al2O3 | 37-41% | 42-46% | 33-37% |
| SiO2 | 57-61% | 54-58% | 48-52% |
| ZrO2 | - | - | 13-17% |
| Fe2O3 | - | 0.1 | 0.1 |
| Specific gravity | 2.65 | 2.65 | 2.65 |
| Fibre diameter | 3.0-4.0 | 3.0-4.0 | 3.0-4.0 |
Why specify Ceramic Bulk Fibre
7 reasons it earns its place on site.
Excellent thermal stability with good resistance to devitrification at high temperature
Lower thermal conductivity
High resiliency
Excellent thermal shock resistance
Excellent chemical stability
Low heat storage capacity
Good sound absorption
Services that use this product
We supply Ceramic Bulk Fibre on its own, or fit it as part of these services with our own crews.
Thermal insulation
Heat loss and heat gain controlled on tanks, equipment and buildings, specified by operating temperature.
Read more
Ceramic fibre from authorised brands
The datasheet you are quoted against is the material that arrives on site.
Morgan Advanced Materials
Questions, answered.
The ones we get most about Ceramic Bulk Fibre. Anything else? Ask on WhatsApp and an estimator will reply.
What temperature can Ceramic Bulk Fibre take?
Classification temperature: 1200 / 1260 / 1425°C, as per the datasheet. Tell us your operating temperature and we will confirm the right grade before we quote.
Where is Ceramic Bulk Fibre used?
Typical uses: raw material for finished products such as boards, shapes, paper and yarn; expansion joints, patching and emergency repair in furnaces, boilers, heaters; loose insulation fill for crowns and walls of kilns and furnaces; packing material for temporary insulation.
Can SGPL supply and install Ceramic Bulk Fibre?
Yes. We supply it on its own, or our own crews install it as part of our hot insulation and thermal insulation work. That starts with a site visit and a written specification, and ends with a joint measurement at handover.
Is Ceramic Bulk Fibre in stock, and do you send a datasheet?
We hold Ceramic Bulk Fibre at our Vatva GIDC (Ahmedabad) and Morbi stockyards. You can download the datasheet on this page, and we can send the test certificate with the dispatch. Send your enquiry before 4 pm and you will usually hear back the same working day.
More from this range
Send the duty and we will send the datasheet.
Get it to us before 4 pm and you will usually hear back the same working day.
2,000+
clients so far, from refineries and power plants to pharma and textile units
