Glass wool insulation
Glass Wool Pipe Section
Thermal and acoustic pipe insulation
Fibreglass pipe sections are designed for easy and rapid installation. One piece moulded insulation made from glass fibre bonded with a high temperature resistant binder. Fibreglass pipe sections are non-combustible and shot free. Pipe diameters from 20 mm to 300 mm are available, plain or with aluminium foil facing.
- 80 kg/m³Density
- 25 - 450 mm NBPipe diameter
- Up to 230°CTemperature range
Ex-stock at Vatva GIDC (Ahmedabad) and Jetpar Road (Morbi). The datasheet and test certificates come with every dispatch.
Where Glass Wool Pipe Section is used
3 common applications. Not sure it suits your duty? Send us the operating temperature and we will tell you.
- 01Heating and hot water pipes
- 02Steam pipes up to 230°C
- 03Chilled water pipes and cold water service pipes
Technical characteristics
Values as given in the product datasheet.
| Property | Value |
|---|---|
| Density | 80 kg/m³ |
| Thickness | 25 to 75 mm |
| Length | 1.20 m |
| Temperature range | Up to 230°C |
| Chemical stability | Chemically inert, rot proof and odourless |
| Fire safety | Non-combustible |
| Facing | Plain / aluminium foil |
| Thermal conductivity | 0.030 W/m·K at 25°C |
| Corrosion resistance | Non-corrosive to metal |
Glass Wool Pipe Section datasheetPDF, 317 KB, sent to your inbox. Full technical values, sizes and applications.
Why specify Glass Wool Pipe Section
8 reasons it earns its place on site.
Green building material with low embodied energy
Zero ozone depleting potential
Non-combustible, does not emit toxic fumes
Low thermal conductivity, cost effective, excellent thermal resistance
Non-corrosive to metal
No shot content and impurities
Non-hygroscopic
Resistant to chemical, oil, fungus, bacteria, vermin and rot attack
Services that use this product
We supply Glass Wool Pipe Section on its own, or fit it as part of these services with our own crews.
Hot insulation
Steam lines, boilers, vessels and ducting held at temperature and finished in metal cladding.
Read more
Cold insulation
Chilled water, brine and refrigeration lines with a continuous, sealed vapour barrier.
Read more
Questions, answered.
The ones we get most about Glass Wool Pipe Section. Anything else? Ask on WhatsApp and an estimator will reply.
What temperature can Glass Wool Pipe Section take?
Temperature range: Up to 230°C, as per the datasheet. Tell us your operating temperature and we will confirm the right grade before we quote.
What sizes and grades does Glass Wool Pipe Section come in?
Thickness: 25 to 75 mm; Density: 80 kg/m³. If you need a size that is not listed, ask us and we will check what the manufacturer can make.
Where is Glass Wool Pipe Section used?
Typical uses: heating and hot water pipes; steam pipes up to 230°C; chilled water pipes and cold water service pipes.
Can SGPL supply and install Glass Wool Pipe Section?
Yes. We supply it on its own, or our own crews install it as part of our HVAC insulation, hot insulation and cold insulation work. That starts with a site visit and a written specification, and ends with a joint measurement at handover.
Is Glass Wool Pipe Section in stock, and do you send a datasheet?
We hold Glass Wool Pipe Section at our Vatva GIDC (Ahmedabad) and Morbi stockyards. You can download the datasheet on this page, and we can send the test certificate with the dispatch. Send your enquiry before 4 pm and you will usually hear back the same working day.
More from this range
Send the duty and we will send the datasheet.
Get it to us before 4 pm and you will usually hear back the same working day.
2,000+
clients so far, from refineries and power plants to pharma and textile units
