Cold insulation
Chilled water, brine and refrigeration lines with a continuous, sealed vapour barrier.
Read more
EPS insulation
EPS Pipe Section
Expanded polystyrene (thermocol) preformed insulation
Expanded polystyrene is a tough, rigid, lightweight, closed cell insulation foam commonly known as EPS, with densities between 8 kg/m³ and 32 kg/m³. Its closed cell structure gives low water vapour permeance, and so it is widely used for thermal insulation in food containers, packaging, building insulation, chilled water piping, refrigeration and more.
- 8 - 32 kg/m³Density range
- 15 - 300 mmPipe diameter
- 1 m / 2 mLength
Ex-stock at Vatva GIDC (Ahmedabad) and Jetpar Road (Morbi). The datasheet and test certificates come with every dispatch.
Where EPS Pipe Section is used
4 common applications. Not sure it suits your duty? Send us the operating temperature and we will tell you.
- 01Packaging industry
- 02Building and construction: under deck insulation
- 03Brine / chilled water pipelines
- 04Refrigeration and cold storage insulation
Technical characteristics
Values as given in the product datasheet.
| Property | Value |
|---|---|
| Density | 8 to 32 kg/m³ |
| Thermal conductivity | At 0°C: 0.02751 kcal/hr m°C; at 10°C: 0.03009 kcal/hr m°C |
| Dimensions | 1 m L x 0.5 m W |
| Thicknesses | 25, 40, 50, 65, 75, 100 mm |
| Pipe diameter | 15 mm to 300 mm (1 m and 2 m L) |
EPS Pipe Section datasheetPDF, 265 KB, sent to your inbox. Full technical values, sizes and applications.
Why specify EPS Pipe Section
6 reasons it earns its place on site.
Lightweight: easy to carry and install
Does not absorb water easily; even after prolonged saturation it keeps its shape, structure and size and retains 80% of its thermal value
Dimensionally stable and does not deteriorate with age
Low thermal conductivity
Fire retardant (available in self-extinguishing grade)
Can be made in any size and shape, so it suits many applications
Services that use this product
We supply EPS Pipe Section on its own, or fit it as part of these services with our own crews.
Questions, answered.
The ones we get most about EPS Pipe Section. Anything else? Ask on WhatsApp and an estimator will reply.
What sizes and grades does EPS Pipe Section come in?
Thicknesses: 25, 40, 50, 65, 75, 100 mm; Dimensions: 1 m L x 0.5 m W; Pipe diameter: 15 mm to 300 mm (1 m and 2 m L); Density: 8 to 32 kg/m³. If you need a size that is not listed, ask us and we will check what the manufacturer can make.
Where is EPS Pipe Section used?
Typical uses: packaging industry; building and construction; brine / chilled water pipelines; refrigeration and cold storage insulation.
Can SGPL supply and install EPS Pipe Section?
Yes. We supply it on its own, or our own crews install it as part of our cold insulation and underdeck insulation work. That starts with a site visit and a written specification, and ends with a joint measurement at handover.
Is EPS Pipe Section in stock, and do you send a datasheet?
We hold EPS Pipe Section at our Vatva GIDC (Ahmedabad) and Morbi stockyards. You can download the datasheet on this page, and we can send the test certificate with the dispatch. Send your enquiry before 4 pm and you will usually hear back the same working day.
More from this range
Send the duty and we will send the datasheet.
Get it to us before 4 pm and you will usually hear back the same working day.
2,000+
clients so far, from refineries and power plants to pharma and textile units
