Insulation cladding & finishing
Aluminium, GI and stainless cladding, bands and sealants that keep the insulation dry.
Read more
Cladding and jacketing
Aluminium Plain Sheet
Metal jacketing for industrial insulation
Aluminium plain sheet is widely used for fabricating metal insulation jacketing. Aluminium is lightweight, easy to fabricate at site and has good corrosion resistance, which makes it suitable for protective cladding across industrial insulation systems.
- AA 3003 / 3105 / 8011 / 1200Common alloys
- 0.38 - 1.22 mmThickness range
- 914 / 1220 mmStandard width
Ex-stock at Vatva GIDC (Ahmedabad) and Jetpar Road (Morbi). The datasheet and test certificates come with every dispatch.
Where Aluminium Plain Sheet is used
3 common applications. Not sure it suits your duty? Send us the operating temperature and we will tell you.
- 01Metal insulation jacketing for piping, ducts and equipment
- 02Sheet or coil form for site fabrication
- 03Industrial insulation cladding that needs a lightweight, corrosion resistant metal
Technical characteristics
Values as given in the product datasheet.
| Property | Value |
|---|---|
| Alloys | AA 3003, AA 3105, AA 8011, AA 1200 |
| Temper | H14 / H16 |
| Standard width | 914 mm, 1220 mm |
| Supply form | Coil form (250 to 325 kg each) |
| Length (coil form) | As per requirement |
| Thickness available | 0.38 to 1.22 mm |
| Preferable thickness | 0.56 mm (24 gauge) |
Values are based on the supplied reference datasheet and may vary by project requirement and availability.
Aluminium Plain Sheet datasheetPDF, 262 KB, sent to your inbox. Full technical values, sizes and applications.
Reference table
| Gauge | Thickness (mm) | Weight (kg/m²) |
|---|---|---|
| 18 | 1.22 | 3.32 |
| 20 | 0.91 | 2.47 |
| 22 | 0.71 | 1.93 |
| 24 | 0.56 | 1.52 |
| 26 | 0.46 | 1.25 |
Why specify Aluminium Plain Sheet
6 reasons it earns its place on site.
Long service life and low maintenance
Easy to fabricate because aluminium is non-brittle
Good corrosion resistance in many industrial environments
Bright reflective appearance
High radiant heat reflectivity
No creep or damage under varying temperatures
Services that use this product
We supply Aluminium Plain Sheet on its own, or fit it as part of these services with our own crews.
Hot insulation
Steam lines, boilers, vessels and ducting held at temperature and finished in metal cladding.
Read more
Cold insulation
Chilled water, brine and refrigeration lines with a continuous, sealed vapour barrier.
Read more
Questions, answered.
The ones we get most about Aluminium Plain Sheet. Anything else? Ask on WhatsApp and an estimator will reply.
What sizes and grades does Aluminium Plain Sheet come in?
Thickness available: 0.38 to 1.22 mm; Supply form: Coil form (250 to 325 kg each). If you need a size that is not listed, ask us and we will check what the manufacturer can make.
Where is Aluminium Plain Sheet used?
Typical uses: metal insulation jacketing for piping, ducts and equipment; sheet or coil form for site fabrication; industrial insulation cladding that needs a lightweight, corrosion resistant metal.
Can SGPL supply and install Aluminium Plain Sheet?
Yes. We supply it on its own, or our own crews install it as part of our insulation cladding and finishing, hot insulation and cold insulation work. That starts with a site visit and a written specification, and ends with a joint measurement at handover.
Is Aluminium Plain Sheet in stock, and do you send a datasheet?
We hold Aluminium Plain Sheet at our Vatva GIDC (Ahmedabad) and Morbi stockyards. You can download the datasheet on this page, and we can send the test certificate with the dispatch. Send your enquiry before 4 pm and you will usually hear back the same working day.
More from this range
Cladding and jacketingAluminium Corrugated SheetCorrugated cladding for industrial insulationView product
Cladding and jacketingAluminium Stucco SheetEmbossed aluminium insulation jacketingView product
Cladding and jacketingAluminium Polykraft / PolysurlynMoisture retarder coated aluminium jacketingView product
Send the duty and we will send the datasheet.
Get it to us before 4 pm and you will usually hear back the same working day.
2,000+
clients so far, from refineries and power plants to pharma and textile units
